Remote-Sensing Based Environmental Surveillance System for Detecting Early Hydrological Disruptions
Downloads
Early detection of hydrological disruptions is critical for safeguarding water resources, preventing ecosystem degradation, and supporting climate-resilient environmental management. This study proposes a Remote-Sensing Based Environmental Surveillance System designed to integrate multi-sensor satellite imagery, hydrometeorological datasets, and machine learning analytics to identify subtle precursors of hydrological anomalies in vulnerable landscapes. The system leverages high-resolution optical, thermal, and radar remote-sensing data to monitor spatiotemporal variations in surface water extent, evapotranspiration rates, soil moisture dynamics, vegetation health, and land-surface temperature anomalies. By applying advanced change-detection algorithms, spectral index assessments, and time-series trend modeling, the system captures early signals of disturbances such as declining groundwater recharge, altered streamflow regimes, watershed desiccation, and potential flood-inducing surface saturation. The surveillance framework incorporates automated anomaly detection using classification models trained to differentiate between natural seasonal variability and environmentally significant deviations associated with anthropogenic pressures or climate-driven extremes. Integration of GIS-based spatial analytics enhances the interpretation of remotely sensed hydrological indicators by providing contextual layers such as watershed boundaries, land use patterns, geomorphological characteristics, and proximity to critical water infrastructure. These combined datasets allow decision-makers to pinpoint emerging hydrological stress zones and assess their cascading impacts on agriculture, biodiversity, and community water security. The system also includes a predictive module that simulates short-term hydrological trajectories under observed environmental changes, enabling proactive planning and timely deployment of mitigation measures. Application of the surveillance system to representative watersheds demonstrates its effectiveness in detecting early hydrological disruptions several weeks before they become operationally significant. Results highlight the substantial advantages of remote sensing for continuous, non-intrusive, and spatially comprehensive environmental monitoring, particularly in regions where ground-based measurements are limited or logistically challenging. By enhancing early warning capabilities, the Remote-Sensing Based Environmental Surveillance System supports climate adaptation planning, ecosystem protection, and sustainable water resource management. Ultimately, this research contributes a scalable, data-driven solution that strengthens environmental surveillance networks and improves societal resilience to hydrological instability.
Adesina, A. A., Okwandu, A. C., & Nwokediegwu, Z. Q. S. (2024). Geo-information systems in urban planning: A review of business and environmental implications. Magna Sci. Adv. Res. Rev, 11, 352-367.
Adesina, A. A., Okwandu, A. C., & Nwokediegwu, Z. Q. S. (2024). Towards sustainable urban development: Conceptualizing green infrastructure and its impact on urban planning. Int. J. Appl. Res. Soc. Sci, 6(7), 1274-1296.
Adetokunbo, A. T., and Sikhakhane-Nwokediegwu, Z. Q. (2022). "Conceptual Framework for Performance-Based Design of Pavement Structures under Variable Loading Conditions”. Shodhshauryam, International Scientific Refereed Research Journal (SHISR RJ), 5(5), 436–456.
Adetokunbo, A. T., and Sikhakhane-Nwokediegwu, Z. Q. (2024). “Conceptual Model for Integrating Field Compaction Data into Mechanistic-Empirical Pavement Design Systems”. International Journal of Scientific Research in Civil Engineering, 8(6), 52-71.
Adetokunbo, A. T., and Sikhakhane-Nwokediegwu, Z. Q. (2025). "Advances in Multi-Scale Analysis Techniques for Evaluating Asphalt Mixture Durability and Environmental Resistance”. Engineering and Technology Journal, 10(12), 8069–8083. ETJ.
Adeyemo, A., Fasasi, S. T., & Ajifowowe, M. I. (2025). Thermal management of Li-ion batteries: A review of current technology and future prospects. International Journal of Green Energy, 4(2), 1–20.
Adio, S. A., Ajirotutu, R. O., Olayiwola, R. K., Erinjogunola, F. L., & Sikhakhane-Nwokediegwu, Z. (2025). From Compliance to Competitive Advantage: The Strategic Role of HSE in Business Sustainability.
Adio, S. A., Sikhakhane-Nwokediegwu, Z., Erinjogunola, F. L., Ajirotutu, R. O., & Olayiwola, R. K. (2025). Integrating AI in Public Transport Workforces: A Review of HR Challenges and Opportunities.
Afolabi, M., Onukogu, O. A., Igunma, T. O., Adeleke, A. K., & Nwokediegwu, Z. Q. S. (2020). Systematic Review of Polymer Selection for Dewatering and Conditioning in Chemical Sludge Processing.
Afolabi, M., Onukogu, O. A., Igunma, T. O., Adeleke, A. K., & Nwokediegwu, Z. Q. S. (2022). Systematic Review of Adsorbent Materials for Heavy Metal Removal in Continuous Wastewater Flow Systems.
Afolabi, M., Onukogu, O. A., Igunma, T. O., Adeleke, A. K., & Nwokediegwu, Z. Q. S. (2021). A Conceptual Framework for Process Intensification in Multi-Stage Chemical Effluent Treatment Units.
Afolabi, M., Onukogu, O. A., Igunma, T. O., Adeleke, A. K., & Nwokediegwu, Z. Q. S.. (2021). Systematic Review of Fluidized Bed Reactor Applications for Ammonia and Nitrite Removal in High-Strength Wastewaters.
Afolabi, M., Onukogu, O. A., Igunma, T. O., Adeleke, A. K., & Nwokediegwu, Z. Q. S. (2021). Systematic Review of pH-Control and Dosing System Design for Acid-Base Neutralization in Industrial Effluents.
Afolabi, M., Onukogu, O. A., Igunma, T. O., Adeleke, A. K., & Nwokediegwu, Z. Q. S. (2020). Advances in Process Safety and Hazard Mitigation in Chlorination and Disinfection Units of Water Treatment Plants.
Afolabi, M., Onukogu, O. A., Igunma, T. O., Adeleke, A. K., & Nwokediegwu, Z. Q. S. (2022). Advances in Heat Integration and Waste Heat Recovery in Industrial Water Reclamation Processes.
Afolabi, M., Onukogu, O. A., Igunma, T. O., Adeleke, A. K., & Nwokediegwu, Z. Q. S. (2021). Kinetic Evaluation of Ozonation and Advanced Oxidation Processes in Colorant-Heavy Textile Wastewater.
Afolabi, M., Onukogu, O. A., Igunma, T. O., Adeleke, A. K., & Nwokediegwu, Z. Q. S. (2022). A Chemical Engineering Model for Catalytic Oxidation of Organic Pollutants in Decentralized Wastewater Facilities.
Afolabi, M., Onukogu, O. A., Igunma, T. O., Adeleke, A. K., & Nwokediegwu, Z. Q. S. (2022). A Conceptual Framework for Thermochemical Process Integration in Sludge Stabilization and Waste-to-Energy Conversion.
Afolabi, M., Onukogu, O. A., Igunma, T. O., Adeleke, A. K., & Nwokediegwu, Z. Q. S. (2022). Advances in Hybrid Chemical-Biological Treatment Systems for Nutrient Removal in Agro-Industrial Effluents.
Afolabi, M., Onukogu, O. A., Igunma, T. O., Nwokediegwu, Z. Q. S., & Adeleke, A. K. (2021). Advances in Reactor Design for High-Efficiency Biochemical Degradation in Industrial Wastewater Treatment Systems.
Afolabi, M., Onukogu, O. A., Igunma, T. O., Nwokediegwu, Z. Q. S., & Adeleke, A. K. (2022). A Chemical Engineering Perspective on Fouling Mechanisms in Long-Term Operation of Membrane Bioreactors.
Ahmed, K. S., Odejobi, O. D., & Oshoba, T. O. (2019). Algorithmic model for constraint satisfaction in cloud network resource allocation. IRE Journals, 2(12), 516–532. Iconic Research and Engineering Journals.
Ahmed, K. S., Odejobi, O. D., & Oshoba, T. O. (2020). Predictive model for cloud resource scaling using machine learning techniques. Journal of Frontiers in Multidisciplinary Research, 1(1), 173–183. Journal of Frontiers in Multidisciplinary Research / Multidisciplinary Frontiers.
Ahmed, K. S., Odejobi, O. D., & Oshoba, T. O. (2021). Certifying algorithm model for Horn constraint systems in distributed databases. International Journal of Scientific Research in Computer Science, Engineering and Information Technology, 7(1), 537–554. IJSRCSEIT.
Aifuwa, S. E., Oshoba, T. O., Ogbuefi, E., Ike, P. N., Nnabueze, S. B., & Olatunde-Thorpe, J. (2020). Predictive analytics models enhancing supply chain demand forecasting accuracy and reducing inventory management inefficiencies. International Journal of Multidisciplinary Research and Growth Evaluation, 1(3), 171–181.
Aifuwa, S. E., Oshoba, T. O., Ogbuefi, E., Olatunde-Thorpe, J., & Akokodaripon, D. (2023). Robo-advisors and behavioral bias mitigation in investment decisions. International Journal of Multidisciplinary Research and Growth Evaluation, 4(2), 937–946.
Ajayi, A. S., Fasasi, S. T., Ajifowowe, M. I., & Adeyemo, A. A. (2024). Development of an electric furnace using bentonite and kaolin sodium silicate as refractory material. International Journal of Mechanical Engineering and Technology, 8(1), 1–10. IAEME.
Ajisafe, T., Fasasi, S. T., Bukhari, T. T., & Amuda, B. (2023). Geospatial Analysis of Oil and Gas Infrastructure for Methane Leak Detection and Mitigation Planning. SAMRIDDHI: A Journal of Physical Sciences, Engineering and Technology, 15(03), 383-390.
Al Shenawa, A., & Bankole, A. (2024). A Review of Gypsum-Based Cementitious Materials in 3D Printing. Proceedings of 60th Annual Associated Schools, 5, 822-830.
Ameh, S., Asogwa, K., Awojulu, T., Oturu, O., & Ezeani, J. (2022). Extended-Release Formulations of Safer Opioids: Improving Adherence and Reducing Mental Health Burdens.
Ameh, S., Asogwa, N., Awojulu, T., Asogwa, K., Ezeani, J., & Oturu, O. (2024). International Journal of Future Engineering Innovations.
Asogwa, K., Ameh, S., Awojulu, T., Oturu, O., & Ezeani, J. (2022). The Role of Food Systems in the Obesity-Diabetes Epidemic: Policy Innovations for a Healthier Nation.
Asogwa, K., Awojulu, T., Asogwa, N., Ameh, S., Ezeani, J., & Oturu, O. (2024). International Journal of Future Engineering Innovations.
Bankole, A. O., Nwokediegwu, Z. S., & Okiye, S. E. (2020). Emerging cementitious composites for 3D printed interiors and exteriors: A materials innovation review. Journal of Frontiers in Multidisciplinary Research, 1(1), 127–144. ISSN: 3050-9726
Bankole, A. O., Nwokediegwu, Z. S., & Okiye, S. E. (2021). A conceptual framework for AI-enhanced 3D printing in architectural component design. Journal of Frontiers in Multidisciplinary Research, 2(2), 103–119. ISSN: 3050-9726
Bankole, A. O., Nwokediegwu, Z. S., & Okiye, S. E. (2023). Additive manufacturing for disaster-resilient urban furniture and infrastructure: A future-ready approach. International Journal of Scientific Research in Science and Technology, 9(6). https://doi.org/10.32628/IJSRST
Bankole, A., & Shenawa, A. A. (2024). 3D Printing in Construction.
Bankole, A., Smith, J., & Al Shenawa, A. (2024). 3D Printed Models.
Bayeroju, O. F., Sanusi, A. N., & Nwokediegwu, Z. Q. S. (2021). Review of Circular Economy Strategies for Sustainable Urban Infrastructure Development and Policy Planning.
Bayeroju, O. F., Sanusi, A. N., & Nwokediegwu, Z. Q. S. (2022). Conceptual Framework for Modular Construction as a Tool for Affordable Housing Provision.
Bayeroju, O. F., Sanusi, A. N., & Nwokediegwu, Z. Q. S. (2023). Conceptual Model for Circular Economy Integration in Urban Regeneration and Infrastructure Renewal.
Bayeroju, O. F., Sanusi, A. N., & Nwokediegwu, Z. Q. S. (2023). Framework for Resilient Construction Materials to Support Climate-Adapted Infrastructure Development.
Bayeroju, O. F., Sanusi, A. N., Queen, Z., & Nwokediegwu, S. (2019). Bio-Based Materials for Construction: A Global Review of Sustainable Infrastructure Practices.
Erinjogunola, F. L., Ajirotutu, R. O., Sikhakhanenwokediegwu, Z., & Olayiwola, R. K. (2025). Public Safety and Structural Monitoring: A Data-Driven Approach to Bridge Maintenance.
Erinjogunola, F. L., Olayiwola, R. K., Ajirotutu, R. O., & Sikhakhane-Nwokediegwu, Z. (2025). Bridging the Gap: Enhancing Civil Engineering Education through Practical Applications. International Journal of Scientific Research in Science and Technology, 12(2), 164-192.
Erinjogunola, F. L., Sikhakhane-Nwokediegwu, Z., Ajirotutu, R. O., & Olayiwola, R. K. (2025). Enhancing bridge safety through AI-driven predictive analytics. International Journal of Social Science Exceptional Research. 2025a, 4(2), 10-26.
Erinjogunola, F. L., Sikhakhane-Nwokediegwu, Z., Ajirotutu, R. O., & Olayiwola, R. K. (2025). Navigating multi-national construction projects: Overcoming challenges. International Journal of Multidisciplinary Research and Growth Evaluation. 2025b, 6(2), 52-67.
Essien, N. A., Idowu, A. T., Lawani, R. I., Okereke, M., Sofoluwe, O., & Olugbemi, G. I. T. (2024, May 5). Comprehensive frameworks for addressing climate change impacts on water resources using AI-driven IoT networks to support public health and sustainability initiatives. International Journal of Scientific Research in Computer Science, Engineering and Information Technology, 10(3), 786–796.
Essien, N. A., Idowu, A. T., Lawani, R. I., Okereke, M., Sofoluwe, O., & Olugbemi, G. I. T. (2024, May 5). Framework for AI-driven predictive maintenance in IoT-enabled water treatment plants to minimize downtime and improve efficiency. International Journal of Scientific Research in Computer Science, Engineering and Information Technology, 10(3), 797–806.
Essien, N. A., Idowu, A. T., Lawani, R. I., Okereke, M., Sofoluwe, O., & Olugbemi, G. I. T. (2025, May 15). Frameworks for AI and IoT-driven early warning systems to predict and mitigate the impact of chemical spills in public water supplies. International Journal of Scientific Research in Chemistry, 10(3), 27–36.
Essien, N. A., Idowu, A., Lawani, R. I., Okereke, M., Sofoluwe, O., & Olugbemi, G. I. T. (2024). Legislative responses to climate change: A comparative analysis of Nigeria and the USA. International Journal of Multidisciplinary Research and Growth Evaluation, 5(4), 1387–1392.
Essien, N. A., Lawani, R. I., Idowu, A. T., Okereke, M., Sofoluwe, O., & Olugbemi, G. I. T. (2022, April 13). Sustainability-centered budgeting framework for local governments to achieve long-term development and environmental goals. International Journal of Multidisciplinary Research and Growth Evaluation, 3(2), 804–817.
Ezeani, J. C. (2023). Development of Low-Cost Environmental Monitoring Sensor Prototypes for the GLOBE Program (Master's thesis, The University of Toledo).
Ezeani, J., Awojulu, T., Oturu, O., Ameh, S., & Asogwa, K. (2024). Comparative Analysis of Conventional vs Membrane-Based Carbon Capture: Technological, Economic, and Environmental Perspectives.
Ezeani, J., Oturu, O., Awojulu, T., Asogwa, K., & Ameh, S. (2023). Challenges and Innovations in Polymeric Membrane Technology for Industrial Gas Separation and Carbon Dioxide Capture with Focus on Air Separation.
Fasasi, S. T. (2025). Single-Blind Controlled Release Testing to Evaluate the Performance of an In-Situ Methane Detection System (Master's thesis, Colorado State University).
Fasasi, S. T., & Ekechi, A. T. (2022). Conceptual framework for process safety and operational reliability in FPSO-based energy systems. International Journal of Artificial Intelligence Engineering and Transformation, 3(1), 19–37.
Fasasi, S. T., Adebowale, O. J., & Nwokediegwu, Z. Q. S. (2019). A techno-economic model of continuous versus intermittent methane monitoring programs. Iconic Research and Engineering Journals, 2(7).
Fasasi, S. T., Adebowale, O. J., & Nwokediegwu, Z. Q. S. (2021). AI-powered leak detection and alerting architecture in continuous monitoring systems. International Journal of Multidisciplinary Evolutionary Research, 2(1), 33–39.
Fasasi, S. T., Adebowale, O. J., & Nwokediegwu, Z. Q. S. (2022). Cost-benefit modeling of continuous versus periodic LDAR strategies for methane emissions. Gyanshauryam, International Scientific Refereed Research Journal, 5(2), 184–196
Fasasi, S. T., Adebowale, O. J., & Nwokediegwu, Z. Q. S. (2023). Modeling the climate impact of early leak detection via continuous monitoring. International Journal of Advanced Multidisciplinary Research and Studies, 3(6), 2117–2123. https://doi.org/10.62225/2583049X.2023.3.6.4738
Fasasi, S. T., Adebowale, O. J., & Nwokediegwu, Z. Q. S. (2023). Evaluating monitoring strategies for high-emission sources: A frequency-response modeling approach. Shodhshauryam, International Scientific Refereed Research Journal, 6(4), 361–371. https://doi.org/10.32628/SHISRRJ
Fasasi, S. T., Adebowale, O. J., & Nwokediegwu, Z. Q. S. (2023). Optimization theory for sensor deployment in continuous methane surveillance systems. Shodhshauryam, International Scientific Refereed Research Journal, 6(4), 385–399. https://doi.org/10.32628/SHISRRJ
Fasasi, S. T., Adebowale, O. J., & Nwokediegwu, Z. Q. S. (2023). Model-driven emission mitigation via continuous monitoring in industrial scenarios. Gyanshauryam, International Scientific Refereed Research Journal, 6(2), 250–261.
Fasasi, S. T., Adebowale, O. J., & Nwokediegwu, Z. Q. S. (2023). Advancing methane leak detection technologies to support energy sector decarbonization. International Journal of Scientific Research in Computer Science, Engineering and Information Technology, 9(6), 500–511. https://doi.org/10.32628/IJSRCSEIT
Fasasi, S. T., Adebowale, O. J., & Nwokediegwu, Z. Q. S. (2024). Modeling the effects of continuous monitoring on leak duration and response timelines. International Journal of Scientific Research in Science, Engineering and Technology, 11(6), 337–347
Fasasi, S. T., Adebowale, O. J., & Nwokediegwu, Z. Q. S. (2024). Uncertainty quantification in continuous monitoring-based methane inventories. International Journal of Scientific Research in Science, Engineering and Technology, 11(6), 348–358
Fasasi, S. T., Adebowale, O. J., & Nwokediegwu, Z. Q. S. (2024). Sensor technology performance under environmental interference: A comparative evaluation model. International Journal of Scientific Research in Computer Science, Engineering and Information Technology, 10(3), 843–855. https://doi.org/10.32628/IJSRCSEIT
Fasasi, S. T., Adebowale, O. J., & Nwokediegwu, Z. Q. S. (2025). A Multi-Sensor Classification Framework for Methane Leak Detection using Machine Learning Algorithms.
Fasasi, S. T., Adebowale, O. J., & Nwokediegwu, Z. Q. S. (2025). A multi-sensor classification framework for methane leak detection using machine learning algorithms. Engineering and Technology Journal, 10(8), 6240–6248.
Fasasi, S. T., Adebowale, O. J., & Nwokediegwu, Z. Q. S. (2025). Framework for quantified methane reductions in industry net-zero strategies. Engineering and Technology Journal, 10(8), 6232–6239.
Fasasi, S. T., Adebowale, O. J., & Nwokediegwu, Z. Q. S. (2025). Cost-efficiency analysis of emission reduction under varying leak detection frequencies. Engineering and Technology Journal, 10(8), 6223–6231. https://doi.org/10.47191/etj/v10i08.15
Fasasi, S. T., Adebowale, O. J., Abdulsalam, A., & Nwokediegwu, Z. Q. S. (2019). Benchmarking performance metrics of methane monitoring technologies in simulated environments. Iconic Research and Engineering Journals, 3(3), 193–202.
Fasasi, S. T., Adebowale, O. J., Abdulsalam, A., & Nwokediegwu, Z. Q. S. (2020). Design framework for continuous monitoring systems in industrial methane surveillance. Iconic Research and Engineering Journals, 4(1), 280–288.
Fasasi, S. T., Adebowale, O. J., Abdulsalam, A., & Nwokediegwu, Z. Q. S. (2020). Time-series modeling of methane emission events using machine learning forecasting algorithms. IRE Journals, 4(4), 337–346.
Fasasi, S. T., Adebowale, O. J., Abdulsalam, A., & Nwokediegwu, Z. Q. S. (2021). Predictive risk modeling of high-probability methane leak events in oil and gas networks. International Journal of Multidisciplinary Evolutionary Research, 2(1), 40–46. https://doi.org/10.54660/IJMER.2021.2.1.40-46
Fasasi, S. T., Adebowale, O. J., Abdulsalam, A., & Nwokediegwu, Z. Q. S. (2020). Atmospheric plume dispersion modeling for methane quantification under variable conditions. IRE Journals, 3(8), 353–362.
Fasasi, S. T., Adebowale, O. J., Abdulsalam, A., Queen, Z., & Nwokediegwu, S. (2021). Framework for Integrating Methane Monitoring Data into Carbon Credit Verification Systems. Framework, 2(2).
Fasasi, S. T., Ajifowowe, I., Ngulat, M. C., Jimoh, A., Fasasi, C. O., & Nwaneto, C. (2024). Design and cost effectiveness of renewable wind-PV hybrid power system in Nigeria. International Journal of Electrical Engineering and Technology, 15(2), 23–28.
Fasasi, S. T., Nwokediegwu, Z. S., & Adebowale, O. J. (2022). A Multi-Variable Engineering Model for Emissions Forecasting in EPA-Regulated Industrial Facilities.
Fasasi, S. T., Nwokediegwu, Z. S., & Adebowale, O. J. (2022). An Engineering Concept for Digital Permit Management Systems to Improve Compliance across Oil and Gas Operations.
Fasasi, S. T., Nwokediegwu, Z. S., & Adebowale, O. J. (2022). Conceptualization of Air Quality Index Performance Metrics for High-Pollution Industrial Zones Under EPA Oversight.
Fasasi, S. T., Nwokediegwu, Z. S., & Adebowale, O. J. (2023). New Concepts in Cross-Functional Compliance Integration for Emissions Monitoring in Regulatory Mechanical Engineering Projects.
Fasasi, S. T., Nwokediegwu, Z. S., & Adebowale, O. J. (2023). Recent Advances in Leak Detection Algorithms Using Controlled Methane Releases and Multivariate Environmental Calibration Protocols.
Fasasi, S., & Ekechi, A. T. (2020). Conceptual framework for process optimization in gas turbine performance and energy efficiency. International Journal of Multidisciplinary Futuristic Development, 1(02), 138–153.
Fasasi, S., & Ekechi, A. T. (2020). Conceptual model for regeneration of biodiesel from agricultural feedstock and waste materials. International Journal of Multidisciplinary Futuristic Development, 1(2), 138–153.
Faseemo, O., Massot, J., Essien, N., Healy, W., & Owah, E. (2009, August). Multidisciplinary Approach to Optimising Hydrocarbon Recovery From Conventional Offshore Nigeria: OML100 Case Study. In SPE Nigeria Annual International Conference and Exhibition (pp. SPE-128889). SPE.
Giwah, M. L., Nwokediegwu, Z. S., Etukudoh, E. A., & Gbabo, E. Y. (2020). A resilient infrastructure financing framework for renewable energy expansion in Sub-Saharan Africa. IRE Journals, 3(12), 382–394. https://www.irejournals.com/paper-details/1709804
Giwah, M. L., Nwokediegwu, Z. S., Etukudoh, E. A., & Gbabo, E. Y. (2020). A systems thinking model for energy policy design in Sub-Saharan Africa. IRE Journals, 3(7), 313–324. https://www.irejournals.com/paper-details/1709803
Giwah, M. L., Nwokediegwu, Z. S., Etukudoh, E. A., & Gbabo, E. Y. (2020). Sustainable energy transition framework for emerging economies: Policy pathways and implementation gaps. International Journal of Multidisciplinary Evolutionary Research, 1(1), 1–6. https://doi.org/10.54660/IJMER.2020.1.1.01-06
Giwah, M. L., Nwokediegwu, Z. S., Etukudoh, E. A., & Gbabo, E. Y. (2021). Integrated waste-to-energy policy model for urban sustainability in West Africa. International Journal of Multidisciplinary Futuristic Development, 2(1), 1–7. https://doi.org/10.54660/IJMFD.2021.2.1.1-7
Giwah, M. L., Nwokediegwu, Z. S., Etukudoh, E. A., & Gbabo, E. Y. (2021). A strategic blueprint model for poverty and unemployment reduction through public policy interventions. International Journal of Multidisciplinary Futuristic Development, 2(2), 1–6. https://doi.org/10.54660/IJMFD.2021.2.2.1-06
Giwah, M. L., Nwokediegwu, Z. S., Etukudoh, E. A., & Gbabo, E. Y. (2021). Designing a circular economy governance framework for urban waste management in African megacities. International Journal of Multidisciplinary Evolutionary Research, 2(2), 20–27. https://doi.org/10.54660/IJMER.2021.2.2.20-27
Giwah, M. L., Nwokediegwu, Z. S., Etukudoh, E. A., & Gbabo, E. Y. (2023). A multi-stakeholder governance model for decentralized energy access in rural communities. International Journal of Scientific Research in Computer Science, Engineering and Information Technology, 10(2), 852–862. https://doi.org/10.32628/CSEIT2342435
Giwah, M. L., Nwokediegwu, Z. S., Etukudoh, E. A., & Gbabo, E. Y. (2023). Designing scalable energy sustainability indices for policy monitoring in African states. International Journal of Advanced Multidisciplinary Research and Studies, 3(6), 2038–2045. https://doi.org/10.62225/2583049X.2023.3.6.4713
Giwah, M. L., Nwokediegwu, Z. S., Etukudoh, E. A., & Gbabo, E. Y. (2025). A policy-driven investment readiness model for sustainable energy enterprises in Africa. International Journal of Emerging Technology, 10(8), 6249–6258. https://doi.org/10.47191/etj/v10i08.18
Hammed, N. I., Oshoba, T. O., & Ahmed, K. S. (2019). Hybrid cloud strategy model for cost-optimized deployment in regulated industries. IRE Journals, 3(2), 932–948. Iconic Research and Engineering Journals.
Hammed, N. I., Oshoba, T. O., & Ahmed, K. S. (2021). Secure migration model from on-premises Active Directory to Entra ID. International Journal of Scientific Research in Computer Science, Engineering and Information Technology, 7(1), 481–491. IJSRCSEIT.
Hammed, N. I., Oshoba, T. O., & Ahmed, K. S. (2023). AI-assisted root cause analysis model for enterprise cloud infrastructure failures. International Journal of Scientific Research in Computer Science, Engineering and Information Technology, 9(1), 604–616. IJSRCSEIT.
Hammed, N. I., Oshoba, T. O., & Ahmed, K. S. (2023). API Management and Governance Model for Large-Scale SaaS Solutions.
Harb, M. M., & Dell'Acqua, F. (2017). Remote sensing in multirisk assessment: Improving disaster preparedness. IEEE Geoscience and remote sensing magazine, 5(1), 53-65.
https://doi.org/10.51594/gjabr.v3i8.152
Ibekwe, K. I., Etukudoh, E. A., Adefemi, A., Nwokediegwu, Z. Q. S., Umoh, A. A., & Usman, F. O. (2024). Software tools in energy management: utilization and impact in Canada, USA, and Africa. International Journal of Science and Research Archive, 11(1), 570-578.
Ike, P. N., Aifuwa, S. E., Nnabueze, S. B., Olatunde-Thorpe, J., Ogbuefi, E., Oshoba, T. O., & Akokodaripon, D. (2018). Utilizing Nanomaterials in Healthcare Supply Chain Management for Improved Drug Delivery Systems. medicine (Ding et al., 2020; Furtado et al., 2018), 12, 13.
Ike, P. N., Aifuwa, S. E., Nnabueze, S. B., Olatunde-Thorpe, J., Ogbuefi, E., Oshoba, T. O., & Akokodaripon, D. (2024). Quantitative risk architecture for public-private partnerships: A multi-layered model for allocating public and private risk. International Journal of Advanced Multidisciplinary Research and Studies, 4(6), 2669–2682.
Ike, P. N., Ogbuefi, E., Nnabueze, S. B., Olatunde-Thorpe, J., Aifuwa, S. E., Oshoba, T. O., & Akokodaripon, D. (2021). Supplier relationship management strategies fostering innovation, collaboration, and resilience in global supply chain ecosystems. International Journal of Multidisciplinary Evolutionary Research, 2(2), 52–62.
Ike, P. N., Ogbuefi, E., Nnabueze, S. B., Olatunde-Thorpe, J., Aifuwa, S. E., Oshoba, T. O., & Akokodaripon, D. (2022). Lean supply chain practices improving operational efficiency, reducing waste, and enhancing organizational competitiveness globally. Journal of Frontiers in Multidisciplinary Research, 3(2), 182–192. Journal of Frontiers in Multidisciplinary Research / Multidisciplinary Frontiers.
Isi, L. R., Essien, N. A., Okereke, M., Owulade, O. A., Isaac, G., Olugbemi, T., & Sofoluwe, O. (2024). Developing a Digital Twin Framework for Real-Time Optimization and Process Enhancement in Energy Operations.
Iyanu, A., Ayobami, A., & Abiola, A. (2024). Development Of An Expert System For Aircraft Failures Causes, Predictions, And Remedies. International Journal of Aerospace Engineering (IJASE), 2(1).
Khan, S. I., Hong, Y., Wang, J., Yilmaz, K. K., Gourley, J. J., Adler, R. F., ... & Irwin, D. (2010). Satellite remote sensing and hydrologic modeling for flood inundation mapping in Lake Victoria basin: Implications for hydrologic prediction in ungauged basins. IEEE Transactions on Geoscience and Remote Sensing, 49(1), 85-95.
Lawoyin, J. O., Nwokediegwu, Z. S., & Gbabo, E. Y. (2020). Client relationship management framework for trust and retention in facility services.
Lawoyin, J. O., Nwokediegwu, Z. S., & Gbabo, E. Y. (2020). Proposed model for integrating risk management into facility operations.
Lawoyin, J. O., Nwokediegwu, Z. S., & Gbabo, E. Y. (2021). Risk Mitigation Model for Coordinating Multi-Facility Construction and Infrastructure Projects.
Lawoyin, J. O., Nwokediegwu, Z. S., & Gbabo, E. Y. (2022). Cost Control Model for Sustainable Medium-Scale Construction Facility Projects.
Lawoyin, J. O., Nwokediegwu, Z. S., & Gbabo, E. Y. (2023). Conceptual Framework for Crisis Preparedness in Facility Operations and Planning.
Lawoyin, J. O., Nwokediegwu, Z. S., & Gbabo, E. Y. (2023). Resource Allocation Model for Efficiency in Complex Facility Management Systems.
Lawoyin, J. O., Nwokediegwu, Z. S., & Gbabo, E. Y. (2024). Documentation and Compliance Framework for Global Facility Management Standards.
Le, T. S., Harper, R., & Dell, B. (2023). Application of remote sensing in detecting and monitoring water stress in forests. Remote Sensing, 15(13), 3360
Mogaji, T. S., Fasasi, S. T., Ogundairo, A. O., & Oluwagbemi, I. A. (2022). Design and Simulation Of A Pico Hydroelectric Turbine System. FUTA Journal Of Engineering And Engineering Technology, 16(1), 132-139.
Nnabueze, S. B., Ike, P. N., Olatunde-Thorpe, J., Aifuwa, S. E., Oshoba, T. O., Ogbuefi, E., & Akokodaripon, D. (2021). End-to-End Visibility Frameworks Improving Transparency, Compliance, and Traceability Across Complex Global Supply Chain Operations.
Nnabueze, S. B., Ike, P. N., Olatunde-Thorpe, J., Aifuwa, S. E., Oshoba, T. O., Ogbuefi, E., & Akokodaripon, D. (2022). Supply Chain Disruption Forecasting Using Network Analytics.
Nwokediegwu, Z. S., Bankole, A. O., & Okiye, S. E. (2019). Advancing interior and exterior construction design through large-scale 3D printing: A comprehensive review. IRE Journals, 3(1), 422-449. ISSN: 2456-8880
Nwokediegwu, Z. S., Bankole, A. O., & Okiye, S. E. (2021). Revolutionizing interior fit-out with gypsum-based 3D printed modular furniture: Trends, materials, and challenges. International Journal of Multidisciplinary Research and Growth Evaluation, 2(3), 641–658. ISSN: 2582-7138
Nwokediegwu, Z. S., Bankole, A. O., & Okiye, S. E. (2022). Layered aesthetics: A review of surface texturing and artistic expression in 3D printed architectural interiors. International Journal of Scientific Research in Science and Technology, 9(6). https://doi.org/10.32628/IJSRST
Nwokediegwu, Z. S., Bankole, A. O., & Okiye, S. E. (2025). A Design-To-Fabrication Workflow for 3D Printing Reinforced Architectural Beams and Façade Panels.
Ogbuefi, E., Olatunde-Thorpe, J., Aifuwa, S. E., Oshoba, T. O., & Akokodaripon, D. (2021). Neural network prediction of pavement roughness and ride quality using in-service roadway data. International Journal of Multidisciplinary Futuristic Development, 2(2), 34–49.
Okereke, M., Isi, L. R., Ogunwale, B., Gobile, S., Oboyi, N., & Essien, N. A. (2025). Market Entry and Alliance Management in the Infrastructure Sector: A Comparative Study of the UAE and the United States.
Okereke, M., Ogu, E., Sofoluwe, O., Essien, N. A., & Isi, L. R. (2024). Creating an AI-Driven Model to Enhance Safety, Efficiency, and Risk Mitigation in Energy Projects.
Okereke, M., Owulade, O. A., Isi, L. R., Amos, N., Essien, O. S., & Olugbemi, G. I. T. (2024) Developing an IoT-Based System for Real-Time Monitoring and Maintenance of Energy and Oil Pipeline Networks.
Okiye, S. E., Nwokediegwu, Z. S., & Bankole, A. O. (2023). Simulation-driven design of 3D printed public infrastructure: From bus stops to benches. Shodhshauryam, International Scientific Refereed Research Journal, 6(4), 285–320. https://doi.org/10.32628/SHISRRJ
Okiye, S. E., Nwokediegwu, Z. S., & Bankole, A. O. (2024). Performance Modeling of 3D Printed Structural Beams Using Low-Carbon Cementitious Composites.
Okiye, S. E., Ohakawa, T. C., & Nwokediegwu, Z. S. (2022). Model for early risk identification to enhance cost and schedule performance in construction projects. IRE Journals, 5(11). ISSN: 2456-8880.
Okiye, S. E., Ohakawa, T. C., & Nwokediegwu, Z. S. (2023). Framework for integrating passive design strategies in sustainable green residential construction. International Journal of Scientific Research in Civil Engineering, 7(6), pp.17–29. https://www.ijsrce.com ISSN: 2456-6667
Okiye, S. E., Ohakawa, T. C., & Nwokediegwu, Z. S. (2023). Framework for solar energy integration in sustainable building projects across Sub-Saharan Africa. International Journal of Advanced Multidisciplinary Research and Studies, 3(6), pp.1878–1899. ISSN: 2583-049X.
Okiye, S.E., Ohakawa, T.C. and Nwokediegwu, Z.S., (2022). Modeling the integration of Building Information Modeling (BIM) and Cost Estimation Tools to Improve Budget Accuracy in Pre-construction Planning, 3(2), pp.729-745. ISSN: 2582-7138
Okoli, I., Appoh, M., Alabi, O. A., Ogunwale, B., Gobile, S., Oboyi, N., & Essien, N. A. (2024). Data Privacy in Social Studies Research: A Comprehensive Review: Investigating Ethical Standards, Challenges, and Emerging Protocols in the Digital Age.
Okwandu, A. C., Akande, D. O., & Nwokediegwu, Z. Q. S. (2024). Green architecture: Conceptualizing vertical greenery in urban design. Eng. Sci. Technol. J, 5, 1657-1677.
Okwandu, A. C., Akande, D. O., & Nwokediegwu, Z. Q. S. (2024). Sustainable architecture: Envisioning self-sustaining buildings for the future. International Journal of Management & Entrepreneurship Research, 6(5), 1512-1532.
Olatunde-Thorpe, J., Aifuwa, S. E., Oshoba, T. O., & Ogbuefi, E. (2020). Metadata-driven access controls: Designing role-based systems for analytics teams in high-risk industries. International Journal of Multidisciplinary Research and Growth Evaluation, 1(3), 143–162.
Olatunde-Thorpe, J., Aifuwa, S. E., Oshoba, T. O., Ogbuefi, E., & Akokodaripon, D. (2022). Comparing MPLS and next-generation routing: A conceptual model for performance, cost, and reliability tradeoffs. International Journal of Multidisciplinary Evolutionary Research, 3(1), 110–119.
Olatunde-Thorpe, J., Aifuwa, S. E., Oshoba, T. O., Ogbuefi, E., & Akokodaripon, D. (2021). Framework for aligning organizational risk culture with cybersecurity governance objectives. International Journal of Multidisciplinary Futuristic Development, 2(2), 61–71.
Olatunde-Thorpe, J., Aifuwa, S. E., Oshoba, T. O., Ogbuefi, E., & Akokodaripon, D. (2022). UAV and computer vision integration for automated pavement distress detection and classification. International Journal of Multidisciplinary Evolutionary Research, 3(1), 90–109.
Olatunde-Thorpe, J., Aifuwa, S. E., Oshoba, T. O., Ogbuefi, E., & Akokodaripon, D. (2022). Integrating load balancing strategies: Conceptual frameworks ensuring optimized performance across enterprise and service provider networks. Journal of Frontiers in Multidisciplinary Research, 3(2), 170–181. Journal of Frontiers in Multidisciplinary Research / Multidisciplinary Frontiers.
Olayiwola, R. K., Erinjogunola, F. L., Ajirotutu, R. O., & Sikakhane-Nwokediegwu, Z. (2025). Public safety and structural monitoring: A data-driven approach to bridge maintenance. ICONIC Research and Engineering Journals, 8(8), 879–906. ICONIC Research and Engineering Journals.
Oshoba, T. O., Ahmed, K. S., & Odejobi, O. D. (2023). Compliance-as-code model for automated governance pipelines in hybrid cloud. International Journal of Scientific Research in Computer Science, Engineering and Information Technology, 9(1), 617–631. IJSRCSEIT.
Oshoba, T. O., Ahmed, K. S., & Odejobi, O. D. (2023). Proactive Threat Intelligence and Detection Model Using Cloud-Native Security Tools.
Oshoba, T. O., Aifuwa, S. E., Ogbuefi, E., & Olatunde-Thorpe, J. (2020). Portfolio Optimization with Multi-Objective Evolutionary Algorithms-Balancing Risk, Return, and Sustainability Metrics.
Oshoba, T. O., Aifuwa, S. E., Ogbuefi, E., Olatunde-Thorpe, J., & Akokodaripon, D. (2023). Green bonds pricing efficiency in primary and secondary markets. International Journal of Management Research and Economics, 4(2), 927–936. IJMRGE.
Oshoba, T. O., Hammed, N. I., & Odejobi, O. D. (2019). Secure identity and access management model for distributed and federated systems. IRE Journals, 3(4), 550–567. Iconic Research and Engineering Journals.
Oshoba, T. O., Hammed, N. I., & Odejobi, O. D. (2021). Adoption model for multi-factor authentication in enterprise Microsoft 365 environments. International Journal of Scientific Research in Computer Science, Engineering and Information Technology, 7(1), 519–536. IJSRCSEIT.
Otokiti, B. O., Igwe, A. N., Ewim, C. P. M., Ibeh, A. I., & Nwokediegwu, Z. S. (2023). A conceptual framework for financial control and performance management in Nigerian SMEs. Journal of Advance Multidisciplinary Research, 2(1), 57-76.
Otokiti, B. O., Igwe, A. N., Ewim, C. P. M., Ibeh, A. I., & Nwokediegwu, Z. S. (2024). A framework for scaling social entrepreneurship in Nigeria: strategies for creating sustainable social impact. Journal of Advance Multidisciplinary Research, 3(1), 74-93.
Otokiti, B. O., Igwe, A. N., Ewim, C. P., Ibeh, A. I., & Sikhakhane-Nwokediegwu, Z. (2022). A framework for developing resilient business models for Nigerian SMEs in response to economic disruptions. Int J Multidiscip Res Growth Eval, 3(1), 647-659.
Owulade, O. A., Isi, L. R., Okereke, M., Sofoluwe, O., Isaac, G., Olugbemi, T., & Essien, N. A. (2019). Review of Reliability Engineering Techniques to Optimize Performance and Risk Management in Energy Infrastructure. Burns, 18.
Sanusi, A. N., Bayeroju, O. F., & Nwokediegwu, Z. Q. S. (2021). Conceptual Framework for Building Information Modelling Adoption in Sustainable Project Delivery Systems.
Sanusi, A. N., Bayeroju, O. F., & Nwokediegwu, Z. Q. S. (2023). Conceptual Framework for Smart Infrastructure Systems Using AI-Driven Predictive Maintenance Models.
Sanusi, A. N., Bayeroju, O. F., & Nwokediegwu, Z. Q. S. (2023). Conceptual Model for Sustainable Procurement and Governance Structures in the Built Environment.
Sanusi, A. N., Bayeroju, O. F., & Nwokediegwu, Z. Q. S. (2023). Conceptual Framework for Climate Change Adaptation through Sustainable Housing Models in Nigeria.
Sanusi, A. N., Bayeroju, O. F., & Nwokediegwu, Z. Q. S. (2023). Framework for Leveraging Artificial Intelligence in Monitoring Environmental Impacts of Green Buildings.
Sanusi, A. N., Bayeroju, O. F., & Nwokediegwu, Z. Q. S. (2023). Review of Blockchain-Enabled Construction Supply Chains for Transparency and Sustainability Outcomes.
Sanusi, A. N., Bayeroju, O. F., Queen, Z., & Nwokediegwu, S. (2019). Circular Economy Integration in Construction: Conceptual Framework for Modular Housing Adoption.
Sherifat, I. K., Abah, M. A., Oyibo, O. N., Tatah, S. V., Oladosu, M. A., Ibukunoluwa, O. E., ... & Ezeani, J. (2025). Impact of E-waste on Human Health and Environment.
Taiwo, A. Idowu, Isi, L. R., Okereke, M., Sofoluwe, O., Olugbemi, G. I. T., & Essien, N. A. (2025). Developing Climate-Adaptive Digital Twin Architectures for Predictive Supply Chain Disruption Management Using Spatio-Temporal Analytics and Edge Computing. International Journal of Scientific Research in Science and Technology, 12(3), 931-947.
Taiwo, A. Idowu, Isi, L. R., Okereke, M., Sofoluwe, O., Olugbemi, G. I. T., & Essien, N. A. (2025). Next-Generation AI-IoT Integrated Systems for Dynamic Optimization of Water Disinfection and Removal of Emerging Contaminants. International Journal of Scientific Research in Science and Technology, 12(3), 948-958.
Taiwo, A. Idowu, Isi, L. R., Okereke, M., Sofoluwe, O., Olugbemi, G. I. T., & Essien, N. A. (2025). Development of AI-Powered Optimization Frameworks for Enhancing Chemical Processes in Sustainable and Energy-Efficient Water Treatment. International Journal of Scientific Research in Science, Engineering and Technology, 12(3), 663-673.
Taiwo, A. Idowu, Isi, L. R., Okereke, M., Sofoluwe, O., Olugbemi, G. I. T., & Essien, N. A. (2024). Legislative Responses to Climate Change: A Comparative Analysis of Nigeria and the USA.
Taiwo, A. Idowu, Isi, L. R., Okereke, M., Sofoluwe, O., Olugbemi, G. I. T., & Essien, N. A. (2025). A Holistic Framework for Leveraging Big Data Analytics and AI to Influence Public Health Policies through IoT-Based Water Monitoring. International Journal of Scientific Research in Science, Engineering and Technology, 12(3), 683-694.
Taiwo, A. Idowu, Isi, L. R., Okereke, M., Sofoluwe, O., Olugbemi, G. I. T., & Essien, N. A. (2025). Advances in Decentralized IoT-Enabled Filtration Systems and Their Role in Providing Safe Water to Underserved and Remote Communities. International Journal of Scientific Research in Science, Engineering and Technology, 12(3), 674-682.
Ugwuanyi, E. D., Nwokediegwu, Z. Q. S., Dada, M. A., Majemite, M. T., & Obaigbena, A. (2024). The impact of nanomaterials in enhancing wastewater treatment processes: A review. Magna Scientia Advanced Research and Reviews, 10(1), 273-285.
Ugwuanyi, E. D., Nwokediegwu, Z. Q. S., Dada, M. A., Majemite, M. T., & Obaigbena, A. (2024). Reviewing the potential of anaerobic membrane bioreactors in wastewater treatment. International Journal of Science and Research Archive, 11(1), 1831-1842.
Ugwuanyi, E. D., Nwokediegwu, Z. Q. S., Dada, M. A., Majemite, M. T., & Obaigbena, A. (2024). The role of algae-based wastewater treatment systems: A comprehensive review. World Journal of Advanced Research and Reviews, 21(02), 937-949.
Uzoho, C. (2025). The public health impact of airborne particulate matter: Risks, mechanisms, and mitigation strategies. Communication In Physical Sciences, 12(2), 600-619.
Uzoho, C. (2025). The role of contaminated water in food poisoning: An assessment of agricultural and processing practices. Communication in Physical Sciences, 12(2), 658-673.
Yohanna, E. R., Showemimo, Y. A., Ayo, G. F., Abah, M. A., Tatah, S. V., John, S. B., ... & Ezeani, J. (2025). Production and Characterization of Urease from Aspergillus niger Using CassavaPeels as Carbon Source Under Solid-State Fermentation.
