A Theoretical Framework for Sustainable Recycling of Polyurethane Foam Waste in Industrial Applications.
Downloads
The sustainable recycling of polyurethane foam (PUF) waste has emerged as a critical challenge due to its widespread industrial use and environmental impact. This study proposes a theoretical framework for the sustainable recycling of PUF waste, integrating material science, engineering processes, and environmental considerations. The framework aims to address the increasing accumulation of PUF waste by optimizing recycling methodologies to enhance efficiency, reduce costs, and minimize environmental harm. Key components of the framework include chemical recycling, mechanical recycling, and thermochemical approaches. Chemical recycling processes, such as glycolysis, hydrolysis, and aminolysis, are evaluated for their effectiveness in breaking down PUF into valuable raw materials. Mechanical recycling, involving shredding and reprocessing, is assessed for its feasibility in producing secondary applications while maintaining material integrity. Additionally, thermochemical methods, including pyrolysis and gasification, are analyzed for their potential to convert PUF waste into energy and chemical feedstocks. The framework incorporates life cycle assessment (LCA) to evaluate the environmental impacts of various recycling techniques, providing insights into energy consumption, greenhouse gas emissions, and resource efficiency. Furthermore, it highlights the importance of integrating renewable energy sources into recycling operations to enhance sustainability. The role of industrial symbiosis, where PUF waste from one process serves as input for another, is emphasized as a pathway to achieve circular economy objectives. Experimental validation of the framework is conducted using advanced characterization techniques such as spectroscopy, thermal analysis, and mechanical testing to assess the quality and usability of recycled materials. The findings reveal that combining chemical and thermochemical methods with energy recovery and industrial symbiosis can significantly enhance recycling efficiency and sustainability. This theoretical framework provides a structured approach to sustainable PUF waste management, offering industries actionable strategies to reduce waste, lower costs, and align with environmental regulations. Its implementation has the potential to transform waste management practices, contributing to a more sustainable industrial ecosystem.
Adadian, M., & Russell, J. (2024). Exploring Backcasting as a Tool to Co-create A Vision for a Circular Economy: A Case Study of the Polyurethane Foam Industry. Circular economy, 2(2).
Akindoyo, J. O., Beg, M., Ghazali, S., Islam, M. R., Jeyaratnam, N., &Yuvaraj, A. R. (2016). Polyurethane types, synthesis and applications–a review. Rsc Advances, 6(115), 114453-114482.
Al-Baghdadia, S., &Alamierya, A. A. (2025). A Critical Review of Current Corrosion Research. Journal of Materials, 3(2), 164-185.
Albannai, A. I. (2022). A brief review on the common defects in wire arc additive manufacturing. Int. J. Curr. Sci. Res. Rev, 5, 4556-4576.
Amesho, K. T., Chinglenthoiba, C., Samsudin, M. S., Lani, M. N., Pandey, A., Desa, M. N. M., & Suresh, V. (2023). Microplastics in the environment: An urgent need for coordinated waste management policies and strategies. Journal of environmental management, 344, 118713.
Arévalo, P., & Jurado, F. (2024). Impact of artificial intelligence on the planning and operation of distributed energy systems in smart grids. Energies, 17(17), 4501.
Briones-Llorente, R., Barbosa, R., Almeida, M., Montero Garcia, E. A., & Rodríguez Sáiz, Á. (2020). Ecological design of new efficient energy-performance construction materials with rigid polyurethane foam waste. Polymers, 12(5), 1048.
Çam, G. (2022). Prospects of producing aluminum parts by wire arc additive manufacturing (WAAM). Materials Today: Proceedings, 62, 77-85.
Çam, G., &Günen, A. (2024). Challenges and opportunities in the production of magnesium parts by directed energy deposition processes. Journal of Magnesium and Alloys.
Chen, L., Zhang, Y., Chen, Z., Dong, Y., Jiang, Y., Hua, J., ... & Yap, P. S. (2024). Biomaterials technology and policies in the building sector: a review. Environmental Chemistry Letters, 22(2), 715-750.
Dahri, A. S., Memon, S. B., & Syed, S. (2025). Digital Infrastructure and Connectivity: The Backbone of Modern Civilization. In Corporate Social Responsibility Approaches to Ethical AI in Business (pp. 225-246). IGI Global Scientific Publishing.
Desai, S. K., Bera, S., & Mondal, D. (2019). Multifaceted synthesis, properties and applications of polyurethanes and its composites. Current Organic Chemistry, 23(4), 361-389.
Dongming, G. U. O. (2024). High-performance manufacturing. International Journal of Extreme Manufacturing, 6(6), 060201.
Edwards, A., Weisz-Patrault, D., &Charkaluk, E. (2023). Analysis and fast modelling of microstructures in duplex stainless steel formed by directed energy deposition additive manufacturing. Additive Manufacturing, 61, 103300.
Elizabeth, I., &Barshilia, H. C. (2025). A Comprehensive Review on Corrosion Detection Methods for Aircraft: Moving from Offline Methodologies to Real-Time Monitoring Combined with Digital Twin Technology. Engineering Science & Technology, 69-98.
Fahim, K. E., Islam, M. R., Shihab, N. A., Olvi, M. R., Al Jonayed, K. L., & Das, A. S. (2024). Transformation and future trends of smart grid using machine and deep learning: a state-of-the-art review. International Journal of Applied, 13(3), 583-593.
Fan, E., Li, L., Wang, Z., Lin, J., Huang, Y., Yao, Y., ... & Wu, F. (2020). Sustainable recycling technology for Li-ion batteries and beyond: challenges and future prospects. Chemical reviews, 120(14), 7020-7063.
Fang, H., Ge, H., Zhang, Q., Liu, Y., & Yao, J. (2023). Numerical simulation of microstructure evolution during laser directed energy deposition for Inconel 718 using cellular automaton method coupled with Eulerian multiphase. International Journal of Heat and Mass Transfer, 216, 124554.
Gama, N. V., Ferreira, A., & Barros-Timmons, A. (2018). Polyurethane foams: Past, present, and future. Materials, 11(10), 1841.
Gu, X., Zhu, S., Liu, S., & Liu, Y. (2023). Analysis of the influencing factors of the efficient degradation of waste polyurethane and its scheme optimization. Polymers, 15(10), 2337.
Gurmesa, F. D., &Lemu, H. G. (2023). Literature Review on Thermomechanical Modelling and Analysis of Residual Stress Effects in Wire Arc Additive Manufacturing. Metals, 13(3), 526.
Haghbin, N. (2024, April). Revolutionizing Mechanical Engineering One-Credit Laboratory Courses: A Project-Based Learning Approach. In ASEE North East Section.
Hassani, S., &Dackermann, U. (2023). A systematic review of advanced sensor technologies for non-destructive testing and structural health monitoring. Sensors, 23(4), 2204.
Herrero-Luna, S., Ferrer-Serrano, M., &Latorre-Martínez, M. P. (2022). Circular economy and innovation: a systematic literature review. Central European Business Review, (ART-2022-128647).
Huang, Z., & Jin, G. (2024). Navigating urban day-ahead energy management considering climate change toward using IoT enabled machine learning technique: Toward future sustainable urban. Sustainable Cities and Society, 101, 105162.
Hussain, M., Zhang, T., Chaudhry, M., Jamil, I., Kausar, S., & Hussain, I. (2024). Review of prediction of stress corrosion cracking in gas pipelines using machine learning. Machines, 12(1), 42.
Imran, M. M. A., Che Idris, A., De Silva, L. C., Kim, Y. B., & Abas, P. E. (2024). Advancements in 3D Printing: Directed Energy Deposition Techniques, Defect Analysis, and Quality Monitoring. Technologies, 12(6), 86.
Infield, D., &Freris, L. (2020). Renewable energy in power systems. John Wiley & Sons.
Jain, R. (2024). Advancements in AI and IoT for Chip Manufacturing and Defect Prevention. CRC Press.
Jamison, A., Kolmos, A., &Holgaard, J. E. (2014). Hybrid learning: An integrative approach to engineering education. Journal of Engineering Education, 103(2), 253-273.
Jehanno, C., Alty, J. W., Roosen, M., De Meester, S., Dove, A. P., Chen, E. Y. X., ... &Sardon, H. (2022). Critical advances and future opportunities in upcycling commodity polymers. Nature, 603(7903), 803-814.
Kabeyi, M. J. B., & Olanrewaju, O. A. (2022). Sustainable energy transition for renewable and low carbon grid electricity generation and supply. Frontiers in Energy research, 9, 743114.
Kanetaki, Z., Stergiou, C., Bekas, G., Jacques, S., Troussas, C., Sgouropoulou, C., &Ouahabi, A. (2022). Grade prediction modeling in hybrid learning environments for sustainable engineering education. Sustainability, 14(9), 5205.
Kapilan, N., Vidhya, P., & Gao, X. Z. (2021). Virtual laboratory: A boon to the mechanical engineering education during covid-19 pandemic. Higher Education for the Future, 8(1), 31-46.
Karimi, K., Fardoost, A., Mhatre, N., Rajan, J., Boisvert, D., &Javanmard, M. (2024). A Thorough Review of Emerging Technologies in Micro-and Nanochannel Fabrication: Limitations, Applications, and Comparison. Micromachines, 15(10), 1274.
Kayode-Ajala, O. (2023). Applications of Cyber Threat Intelligence (CTI) in financial institutions and challenges in its adoption. Applied Research in Artificial Intelligence and Cloud Computing, 6(8), 1-21.
Kehrer, L., Keursten, J., Hirschberg, V., &Böhlke, T. (2023). Dynamic mechanical analysis of PA 6 under hydrothermal influences and viscoelastic material modeling. Journal of Thermoplastic Composite Materials, 36(11), 4630-4664.
Kemona, A., &Piotrowska, M. (2020). Polyurethane recycling and disposal: Methods and prospects. Polymers, 12(8), 1752.
Khalid, M. (2024). Energy 4.0: AI-enabled digital transformation for sustainable power networks. Computers & Industrial Engineering, 110253.
Khan, R. U., Yin, J., Ahani, E., Nawaz, R., & Yang, M. (2024). Seaport infrastructure risk assessment for hazardous cargo operations using Bayesian networks. Marine Pollution Bulletin, 208, 116966.
Khan, T., Acar, V., Aydin, M. R., Hülagü, B., Akbulut, H., &Seydibeyoğlu, M. Ö. (2020). A review on recent advances in sandwich structures based on polyurethane foam cores. Polymer Composites, 41(6), 2355-2400.
Khanna, V. K. (2023). Extreme-temperature and harsh-environment electronics: physics, technology and applications. IOP Publishing.
Kiasari, M., Ghaffari, M., & Aly, H. H. (2024). A comprehensive review of the current status of smart grid technologies for renewable energies integration and future trends: the role of machine learning and energy storage systems. Energies, 17(16), 4128.
Kim, S., Li, K., Alsbaiee, A., Brutman, J. P., &Dichtel, W. R. (2023). Circular reprocessing of thermoset polyurethane foams. Advanced Materials, 35(41), 2305387.
Kishor, G., Mugada, K. K., Mahto, R. P., &Okulov, A. (2024). Assessment of microstructure development, defect formation, innovations, and challenges in wire arc based metal additive manufacturing. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 14644207241302262.
Knapp, E. D. (2024). Industrial Network Security: Securing critical infrastructure networks for smart grid, SCADA, and other Industrial Control Systems. Elsevier.
Kolus, A., Wells, R., & Neumann, P. (2018). Production quality and human factors engineering: A systematic review and theoretical framework. Applied ergonomics, 73, 55-89.
Kopelmann, K., Bruns, M., Nocke, A., Beitelschmidt, M., &Cherif, C. (2023). Characterization of the Viscoelastic Properties of Yarn Materials: Dynamic Mechanical Analysis in Longitudinal Direction. Textiles, 3(3), 307-318.
Kruse, T. M. (2018). Integrating Environment, Safety and Health Management Systems in Support of Lean Outcomes.
Kumar, A., Panda, D., &Gangawane, K. M. (2024). Microfabrication: techniques and technology. Microfabrication and Nanofabrication: Precision Manufacturing, 11, 47.
Kurrahman, T., Tsai, F. M., Jeng, S. Y., Chiu, A. S., Wu, K. J., & Tseng, M. L. (2024). Sustainable development performance in the semiconductor industry: A data-driven practical guide to strategic roadmapping. Journal of Cleaner Production, 445, 141207.
Kylili, A., Seduikyte, L., &Fokaides, P. A. (2018). Life cycle analysis of polyurethane foam wastes. In Recycling of polyurethane foams (pp. 97-113). William Andrew Publishing.
Lackéus, M., & Williams Middleton, K. (2015). Venture creation programs: bridging entrepreneurship education and technology transfer. Education+ training, 57(1), 48-73.
Lamsal, R. R., Devkota, A., &Bhusal, M. S. (2023). Navigating Global Challenges: The Crucial Role of Semiconductors in Advancing Globalization. Journal of The Institution of Engineers (India): Series B, 104(6), 1389-1399.
Li, Q. (2024). Exploring the Reform of Flipped Classroom Teaching Based on SPOC: A Case Study of" ARM Embedded System Architecture". International Journal of Education and Humanities, 12(1), 11-13.
Li, S. H., Kumar, P., Chandra, S., &Ramamurty, U. (2023). Directed energy deposition of metals: processing, microstructures, and mechanical properties. International Materials Reviews, 68(6), 605-647.
Li, Y., Su, C., & Zhu, J. (2022). Comprehensive review of wire arc additive manufacturing: Hardware system, physical process, monitoring, property characterization, application and future prospects. Results in Engineering, 13, 100330.
Li, Z., Mi, B., Ma, X., Liu, P., Ma, F., Zhang, K., ... & Li, W. (2023). Review of thin-film resistor sensors: Exploring materials, classification, and preparation techniques. Chemical Engineering Journal, 147029.
Liu, B., Westman, Z., Richardson, K., Lim, D., Stottlemyer, A. L., Farmer, T., ... & Abu-Omar, M. M. (2023). Opportunities in closed-loop molecular recycling of end-of-life polyurethane. ACS Sustainable Chemistry & Engineering, 11(16), 6114-6128.
Liu, Y. (2017). Renovation of a mechanical engineering senior design class to an industry-tied and team-oriented course. European Journal of Engineering Education, 42(6), 800-811.
Liu, Z., Chen, Z., Wang, Z., Zhang, D., & Ni, B. J. (2024). Recycling and repurposing of waste carbon nanofiber polymers: a critical review. Environmental Science: Nano.
Machín, A., Cotto, M. C., Díaz, F., Duconge, J., Morant, C., & Márquez, F. (2024). Environmental aspects and recycling of solid-state batteries: a comprehensive review. Batteries, 10(7), 255.
Maitra, V., Su, Y., & Shi, J. (2024). Virtual metrology in semiconductor manufacturing: Current status and future prospects. Expert Systems with Applications, 123559.
Marcelino-Sádaba, S., Benito, P., Martin-Antunes, M. Á., Roldán, P. V., &Veiga, F. (2024). Recovered Foam Impact Absorption Systems. Applied Sciences, 14(20), 9549.
Marougkas, A., Troussas, C., Krouska, A., &Sgouropoulou, C. (2023). Virtual reality in education: a review of learning theories, approaches and methodologies for the last decade. Electronics, 12(13), 2832.
Massaoudi, M. S., Abu-Rub, H., &Ghrayeb, A. (2023). Navigating the landscape of deep reinforcement learning for power system stability control: A review. IEEE Access, 11, 134298-134317.
Melly, S. K., Liu, L., Liu, Y., &Leng, J. (2020). Active composites based on shape memory polymers: overview, fabrication methods, applications, and future prospects. Journal of Materials Science, 55, 10975-11051.
Mensah, R. A., Shanmugam, V., Narayanan, S., Renner, J. S., Babu, K., Neisiany, R. E., ... & Das, O. (2022). A review of sustainable and environment-friendly flame retardants used in plastics. Polymer Testing, 108, 107511.
Mishra, R. K., Mishra, V., & Mishra, S. N. (2024). Nanowire-Based Si-CMOS Devices. In Beyond Si-Based CMOS Devices: Materials to Architecture (pp. 27-88). Singapore: Springer Nature Singapore.
Mistry, M., Prajapati, V., &Dholakiya, B. Z. (2024). Redefining Construction: An In-Depth Review of Sustainable Polyurethane Applications. Journal of Polymers and the Environment, 1-42.
Mohammadi, A., Doctorsafaei, A., Ghodsieh, M., &Beigi-Boroujeni, S. (2023). Polyurethane foams. In Polymeric Foams: Fundamentals and Types of Foams (Volume 1) (pp. 143-159). American Chemical Society.
Mohammadi, M., & Mohammadi, A. (2024). Empowering distributed solutions in renewable energy systems and grid optimization. In Distributed Machine Learning and Computing: Theory and Applications (pp. 141-155). Cham: Springer International Publishing.
Moshkbid, E., Cree, D. E., Bradford, L., & Zhang, W. (2024). Biodegradable alternatives to plastic in medical equipment: current state, challenges, and the future. Journal of Composites Science, 8(9), 342.
Mostafaei, A., Ghiaasiaan, R., Ho, I. T., Strayer, S., Chang, K. C., Shamsaei, N., ... & To, A. C. (2023). Additive manufacturing of nickel-based superalloys: A state-of-the-art review on process-structure-defect-property relationship. Progress in Materials Science, 136, 101108.
Muecklich, N., Sikora, I., Paraskevas, A., &Padhra, A. (2023). Safety and reliability in aviation–A systematic scoping review of normal accident theory, high-reliability theory, and resilience engineering in aviation. Safety science, 162, 106097.
Muhammed Raji, A., Hambali, H. U., Khan, Z. I., Binti Mohamad, Z., Azman, H., &Ogabi, R. (2023). Emerging trends in flame retardancy of rigid polyurethane foam and its composites: A review. Journal of Cellular Plastics, 59(1), 65-122.
Mukherjee, S., Pal, D., Bhattacharyya, A., & Roy, S. (2024). 28 Future of the Semiconductor Industry. Handbook of Semiconductors: Fundamentals to Emerging Applications, 359.
Nagalingam, A. P., Shamir, M., Tureyen, E. B., Sharman, A. R. C., Poyraz, O., Yasa, E., & Hughes, J. (2025). Recent progress in wire-arc and wire-laser directed energy deposition (DED) of titanium and aluminium alloys. The International Journal of Advanced Manufacturing Technology, 1-39.
Namdar, J., &Saénz, M. J. (2024). The Potential Role of the Secondary Market for Semiconductor Manufacturing Equipment.
Nascimento, D. L. M., Alencastro, V., Quelhas, O. L. G., Caiado, R. G. G., Garza-Reyes, J. A., Rocha-Lona, L., & Tortorella, G. (2019). Exploring Industry 4.0 technologies to enable circular economy practices in a manufacturing context: A business model proposal. Journal of manufacturing technology management, 30(3), 607-627.
Nelaturu, P., Hattrick-Simpers, J. R., Moorehead, M., Jambur, V., Szlufarska, I., Couet, A., &Thoma, D. J. (2024). Multi-principal element alloy discovery using directed energy deposition and machine learning. Materials Science and Engineering: A, 891, 145945.
Özel, T., Shokri, H., &Loizeau, R. (2023). A review on wire-fed directed energy deposition based metal additive manufacturing. Journal of Manufacturing and Materials Processing, 7(1), 45.
Pandey, V. C., Bajpai, O., & Singh, N. (2016). Energy crops in sustainable phytoremediation. Renewable and Sustainable Energy Reviews, 54, 58-73.
Panicker, S. (2023). Knowledge-based Modelling of Additive Manufacturing for Sustainability Performance Analysis and Decision Making.
Podgórski, M., Spurgin, N., Mavila, S., & Bowman, C. N. (2020). Mixed mechanisms of bond exchange in covalent adaptable networks: monitoring the contribution of reversible exchange and reversible addition in thiol–succinic anhydride dynamic networks. Polymer Chemistry, 11(33), 5365-5376.
Qian, Q., Asinger, P. A., Lee, M. J., Han, G., Mizrahi Rodriguez, K., Lin, S., ... & Smith, Z. P. (2020). MOF-based membranes for gas separations. Chemical reviews, 120(16), 8161-8266.
Qiu, Z., Shen, X., & Zhao, Z. (2024). Development Trends and Prospects of Semiconductor Devices and Technology. Highlights in Science, Engineering and Technology, 81, 374-380.
Qiu, Z., Wang, Z., van Duin, S., Wu, B., Zhu, H., Wexler, D., ... & Li, H. (2024). A review of challenges and optimization processing during additive manufacturing of trademarked Ni-Cr-based alloys. Modern Manufacturing Processes for Aircraft Materials, 263-309.
Ramasesh, R. V., & Browning, T. R. (2014). A conceptual framework for tackling knowable unknown unknowns in project management. Journal of operations management, 32(4), 190-204.
Rashid, M., Sabu, S., Kunjachan, A., Agilan, M., Anjilivelil, T., & Joseph, J. (2024). Advances in Wire-Arc Additive Manufacturing of Nickel-Based Superalloys: Heat Sources, DfAM Principles, Material Evaluation, Process Parameters, Defect Management, Corrosion Evaluation and Post-Processing Techniques. International Journal of Lightweight Materials and Manufacture.
Raut, L. P., Taiwade, R. V., Fande, A., Narayane, D., &Tawele, P. (2024). 11 Additive Integration Manufacturing with Welding. Advanced Welding Techniques: Current Trends and Future Perspectives, 198.
Ren, S., Zhang, Y., Liu, Y., Sakao, T., Huisingh, D., & Almeida, C. M. (2019). A comprehensive review of big data analytics throughout product lifecycle to support sustainable smart manufacturing: A framework, challenges and future research directions. Journal of cleaner production, 210, 1343-1365.
SaberiKamarposhti, M., Kamyab, H., Krishnan, S., Yusuf, M., Rezania, S., Chelliapan, S., &Khorami, M. (2024). A comprehensive review of AI-enhanced smart grid integration for hydrogen energy: Advances, challenges, and future prospects. International Journal of Hydrogen Energy.
Saeedi, A., Eslami-Farsani, R., Ebrahimnezhad-Khaljiri, H., & Najafi, M. (2022). Dynamic mechanical analysis of epoxy/natural fiber composites. In Handbook of Epoxy/Fiber Composites (pp. 1-28). Singapore: Springer Singapore.
Sharma, G., Rathore, S., Kumar, H., & Yadav, K. K. (2024). Wear Properties of Wire and Arc Additive Manufacturing Components: A review on recent developments on Processes, Materials and Parameters. Library of Progress-Library Science, Information Technology & Computer, 44(3).
Sharma, M., Das, P. P., Kumar, S., &Purkait, M. K. (2023). Polyurethane foams as packing and insulating materials. In Polyurethanes: Preparation, Properties, and Applications Volume 3: Emerging Applications (pp. 83-99). American Chemical Society.
Shi, L., Wang, J., Xu, S., Li, J., Chen, C., Hu, T., ... & Ren, Z. (2023). Modeling of epitaxial growth of single crystal superalloys fabricated by directed energy deposition. Materials Today Communications, 35, 105899.
Simões, S. (2024). High-Performance Advanced Composites in Multifunctional Material Design: State of the Art, Challenges, and Future Directions. Materials, 17(23), 5997.
Singh, I., Samal, S. K., Mohanty, S., & Nayak, S. K. (2020). Recent advancement in plant oil derived polyol‐based polyurethane foam for future perspective: a review. European journal of lipid science and technology, 122(3), 1900225.
Sivakumar, M., Karthikeyan, R., Balaji, N. S., & Kannan, G. R. (2024). Advanced Techniques in Wire Arc Additive Manufacturing: Monitoring, Control, and Automation. Advances in Additive Manufacturing, 443-466.
Sridar, S., Sargent, N., Wang, X., Klecka, M. A., & Xiong, W. (2022). Determination of location-specific solidification cracking susceptibility for a mixed dissimilar alloy processed by wire-arc additive manufacturing. Metals, 12(2), 284.
Srivastava, M., Rathee, S., Tiwari, A., & Dongre, M. (2023). Wire arc additive manufacturing of metals: A review on processes, materials and their behaviour. Materials Chemistry and Physics, 294, 126988.
Tchonkouang, R. D., Onyeaka, H., & Miri, T. (2023). From waste to plate: Exploring the impact of food waste valorisation on achieving zero hunger. Sustainability, 15(13), 10571.
Ukoba, K., Olatunji, K. O., Adeoye, E., Jen, T. C., &Madyira, D. M. (2024). Optimizing renewable energy systems through artificial intelligence: Review and future prospects. Energy & Environment, 0958305X241256293.
Vanapalli, K. R., Sharma, H. B., Anand, S., Ranjan, V. P., Singh, H., Dubey, B. K., & Mohanty, B. (2023). Cigarettes butt littering: The story of the world’s most littered item from the perspective of pollution, remedial actions, and policy measures. Journal of Hazardous Materials, 453, 131387.
Wall, A. (2023). On the development of a novel solidification crack test for additive manufacturing (Doctoral dissertation, University of British Columbia).
Wang, Z., Wang, C., Gao, Y., Li, Z., Shang, Y., & Li, H. (2023). Porous thermal insulation polyurethane foam materials. Polymers, 15(18), 3818.
Weidner, T., Yang, A., & Hamm, M. W. (2019). Consolidating the current knowledge on urban agriculture in productive urban food systems: Learnings, gaps and outlook. Journal of Cleaner Production, 209, 1637-1655.
Worch, J. C., & Dove, A. P. (2020). 100th Anniversary of macromolecular science viewpoint: Toward catalytic chemical recycling of waste (and future) plastics. ACS Macro Letters, 9(11), 1494-1506.
Wu, J., Xiao, L., Liu, P., Zhu, Y., & Li, J. (2024). Direct regeneration and upcycling of cathode material from spent lithium ion batteries: Recent advances and perspectives. Separation and Purification Technology, 129574.
Wu, J., Zheng, M., Liu, T., Wang, Y., Liu, Y., Nai, J., ... & Tao, X. (2023). Direct recovery: A sustainable recycling technology for spent lithium-ion battery. Energy Storage Materials, 54, 120-134.
Xu, P., Tan, D. H., Jiao, B., Gao, H., Yu, X., & Chen, Z. (2023). A materials perspective on direct recycling of lithium‐ion batteries: principles, challenges and opportunities. Advanced Functional Materials, 33(14), 2213168.
Xu, S., Lu, H., Wang, J., Shi, L., Chen, C., Hu, T., & Ren, Z. (2023). Multi-scale modeling and experimental study on microstructure of Ni-based superalloys in additive manufacturing. Metallurgical and Materials Transactions A, 54(10), 3897-3911.
Yadav, V. G., Yadav, G. D., &Patankar, S. C. (2020). The production of fuels and chemicals in the new world: critical analysis of the choice between crude oil and biomass vis-à-vis sustainability and the environment. Clean technologies and environmental policy, 22, 1757-1774.
Yang, Y., Boom, R., Irion, B., Van Heerden, D. J., Kuiper, P., & De Wit, H. (2012). Recycling of composite materials. Chemical Engineering and Processing: Process Intensification, 51, 53-68.
Yu, H., Zahidi, I., Fai, C. M., Liang, D., & Madsen, D. Ø. (2024). Mineral waste recycling, sustainable chemical engineering, and circular economy. Results in Engineering, 21, 101865.
Yuan, L., Ju, S., Huang, S., Spinelli, I., Yang, J., Shen, C., ... & Kitt, A. (2023). Validation and application of cellular automaton model for microstructure evolution in IN718 during directed energy deposition. Computational Materials Science, 230, 112450.
Zarezadeh, E., Tangestani, M., & Jafari, A. J. (2024). A systematic review of methodologies and solutions for recycling polyurethane foams to safeguard the environment. Heliyon.
Zeng, Y., Guo, J., Zhang, J., Yang, W., & Li, L. (2024). The Microstructure characteristic and Its influence on the stray grains of Nickel-based single crystal superalloys prepared by Laser directed energy deposition. Journal of Materials Processing Technology, 329, 118443.
Zhang, H., Li, R., Liu, J., Wang, K., Weijian, Q., Shi, L., ... & Wu, S. (2024). State-of-art review on the process-structure-properties-performance linkage in wire arc additive manufacturing. Virtual and Physical Prototyping, 19(1), e2390495.
Zhang, X., Gong, T., Xiao, Y., & Sun, Y. (2023). Dynamic mechanical properties and penetration behavior of reactive nano-inorganic cement-based composites. International Journal of Impact Engineering, 173, 104455.
Zhang, X., Li, L., Fan, E., Xue, Q., Bian, Y., Wu, F., & Chen, R. (2018). Toward sustainable and systematic recycling of spent rechargeable batteries. Chemical Society Reviews, 47(19), 7239-7302.
Zhang, Y., Lei, P., Wang, L., & Yang, J. (2023). Effects of Strain Rate and Fiber Content on the Dynamic Mechanical Properties of Sisal Fiber Cement-Based Composites. Journal of Renewable Materials, 11(1).
Zhou, T., Qiu, Z., Li, Y., Ma, Y., Tao, W., Dong, B., ... & Li, H. (2022): Wire Arc Additive Manufacturing of Nickel-based Superalloy and Stainless Steel Dissimilar Material Component. In Materials for Land, Air, and Space Transportation (pp. 334-386). CRC Press.
